Presentation Assistance Center - GCC 314
How to use the speech capture system in the PAC - GCC 314
Ken Burton
Last Update há 3 anos
The speech capture system is always ready. The only thing required from you is a USB flash drive with available space.
- Insert your flash drive into the USB port on the black control panel.
Once inserted, a small green LED will flash next to the port. Once it stops flashing, The system is ready to record.
- Press the "RECORD" button at the top of the panel.
- The "RECORD" but will turn red.
The mic and the camera are already active, so all you need to do is start your speech.
To stop recording:
- Press the square "STOP" button.
- The green LED will blink.
- Once it stops blinking, you may remove your drive.
**DO NOT REMOVE THE USB DRIVE UNTIL THE GREEN LED STOPS BLINKING**
Your recording will be in a folder labeled with the room number, date and time. The recording is a .m4v file which can be uploaded and shared as needed, or just played locally on a computer from your flash drive.
Using the wall-mounted monitor
A monitor is available should you want to use a screen in conjunction with your speech.
- Turn on the monitor with the remote or with the button at the bottom center surface of the unit.
A HDMI cable is connected to the monitor.
- Plug in your laptop and send video out (per your machine).
- A USB-C adapter is tethered to the cable, should you need it.
- The monitor input should be on HDMI 1 to display video from the cable.